Join / Sign In
Arts & Crafts
Games & Tricks
Sports & Fitness
Allen Wrench Set
Build a Bicycle
I will teach you the basics to building a bicycle from purchased parts. note... I made this guide with photos I already had from various bike builds. in some steps t...
bike parts, grease, chain lube, Phillips head screwdriver, rubber hammer, metal saw, large adjustabl...
Make an Emergency Charger Out of Household Items
Imagine a situation where you have no electricity. No way to get to anyone for help (maybe extreme weather). You need to call for help but your phone has a dead bat...
Cordless drill, Aluminum foil, Two straws, Allen wrench (similar shaped lever)
Change Rear Brake Pads on Triumph Bonneville
Helps you change the rear brake pad set on a Triumph Bonneville. Put the motorcycle on center stand or paddock stand Use 5mm allen key to loosen the pad retaining pi...
Brake pad set T2020555, Hex Bit set, Torque wrench, Hot soap water, clean hot water, Grease and clea...
Install a Locking Nut Without Affecting Tone
When purchasing your hardware make sure to verify neck width and string spacing. The goal will be to install the locking nut just after the stock nut to preserve th...
cheap guitar, locking nut kit (w/allen wrenches), powered drill, phillips screwdriver, ruler
Clean a Mid-Cap Magazine
Keeping clean mags will help your on-field performance by reducing your mag jams and feed issues. All of these tools and materials cost less than $20 and are availab...
Mid-Cap Magazine (Echo1), Allen wrench (size varies), Small Phillips Screwdriver, 100% Pure Silicone...
Pull and Dismantle VW Mk2 Golf 1.8L Block
Jack it up! Disconnect battery... Remove if desired. Unscrew oil pan bolt! - 19mm socket. Drain the oil! Disconnect airflow sensor Pull vacuum line from intake mani...
Flathead Screwdriver, Phillips Screwdriver, Extendable Pliers, Socket Wrench, 19mm Socket, 14mm Sock...
Remove a Medeco Deadbolt
There are many reasons you may need to remove a Medeco deadbolt. In my case I needed new keys and did not have the key card, so the entire cylinder had to be taken ...
1/16" hex key, Pin, Small coin (penny or dime)