How to Tile and Grout a Bathroom

by Marc Christopher



  • Sanded grout
  • Float (for grout)
  • 2 buckets
  • Sponge
  • Thinset mortar
  • Trowel
  • Tiles
  • Mask
  • Instructions

    Step 1

    For how to mix mortar or grout skip ahead to step 7.

    Step 2

    Mix mortar in bucket (or use premixed thinset as I did) and place some mortar on flat edge

    Step 3

    Apply mortar using flat edge.

    Step 4

    Drag ribbed edge along mortar to create notches.

    Step 5

    For best results placing tiles on a wall, screw a 2x4 onto the wall and place tiles on top of the wood. Use a level to make sure th 2x4 is level before placing tiles

    Step 6

    After placing tiles (I did not have room for tile spacers as this is fixing someone else's mess) clean off any extra thinset - once it sets you will have a lot of trouble getting it off

    Step 7

    Wash your hands and wait for the mortar to dry. Use the money you saved by not hiring a contractor on a nice dinner. - will update to show grouting/mixing grout on my lunch break.

    Step 8

    Utility bucket, sanded white grout, face mask , putty knife and mixer (not used)

    Step 9

    I'm using white grout so I NEEDED to clean the bucket so that the grout matches existing white grout.

    Step 10

    Put mask on, pour grout in bucket and add SOME water. Mix with putty knife. This grout needs more water.

    Step 11

    When the grout gets to about this consistency you have added enough water. Mix and let sit for 10 min. If you added a bit too much water let it sit longer.

    Step 12

    Place some grout on the float

    Step 13

    Strike tiles at about 45 degree angle and apply pressure as you drag (making sure the grout gets all the way into the space between tiles).

    Step 14

    Once your done get a bucket of water and a sponge. Wring sponge VERY dry.

    Step 15

    Lightly drag sponge across surface of the tiles, washing off excess grout often.

    Step 16

    Wash off excess grout. And repeat previous step again after 15 min. And again after about an hour .

    Step 17

    Use grout sealer after about 2 days to make it more resistant to water damage. You're done congrats!