Place the spool of thread in the top of the machine on the spool pin. Place the spool holder on the end.
Pull the thread around the thread guide.
Guide the thread down the right side of the thread guide plate and around the bottom.
Thread through the eye of the take-up lever.
Pull down along the left side of the thread guide plate.
Guide the thread behind the needle bar thread guide.
Pull the thread through the eye of the needle.
Place the bobbin in the bobbin holder.
Pull the thread through the first notch.
Bring the thread clockwise through the second notch.
Replace the hook cover plate.
Pull the top sting taut.
Press the needle position button twice.
Pull the thread through so it is coming out of both the needle and the bottom of the machine.