How to Test Your Waterproof Lifeproof Case

Hope you enjoy! If your case turns out to not be waterproof, contact Lifeproof and they may give you a new case.

3.6k Views 55 Likes
How to Test Your Waterproof Lifeproof Case
8 Steps
Supplies
Embed
1
Fill the sink with water.

Fill the sink with water.

2
Make sure to close both the charger jack and the earphone jack!

Make sure to close both the charger jack and the earphone jack!

Recommended For You
3
Completely submerge your iPhone in the sink of water for 30 minutes. Make sure your phone is somewhere safe where it will not get wet, and not IN the case.

Completely submerge your iPhone in the sink of water for 30 minutes. Make sure your phone is somewhere safe where it will not get wet, and not IN the case.

4
Take the case out of the water after 30 minutes.

Take the case out of the water after 30 minutes.

5
Dry off the OUTSIDE only of your case.

Dry off the OUTSIDE only of your case.

6
Taking apart your case!

Taking apart your case!

7
Check to make sure the inside is completely dry.

Check to make sure the inside is completely dry.

8

Once it is, put your phone back in the case and be confident that your phone is ready for anything!

keyboard shortcuts:     previous step     next step
Comments
0 COMMENTS
View More Comments