How to Re-Tape the Blade of Your Hockey Stick

603 Views 10 Likes
How to Re-Tape the Blade of Your Hockey Stick
10 Steps
Supplies
Embed
1
First get your stick, tape, scissors, and wax, If you want.

First get your stick, tape, scissors, and wax, If you want.

2
Get a piece of tape and cover the bottom or the blade.

Get a piece of tape and cover the bottom or the blade.

Recommended For You
3
Start at the heal of the stick and wrap the tape around the top.

Start at the heal of the stick and wrap the tape around the top.

4
Make sure the each edge of the tape Is limbed up with the middle of the strip from the last wrap around.

Make sure the each edge of the tape Is limbed up with the middle of the strip from the last wrap around.

5
Before you reach the end of the toe cut the tape so that you have about that much left.

Before you reach the end of the toe cut the tape so that you have about that much left.

6
Then, cut individual strips a little longer the the toe itself. Place them just like before. Be sure to cover the toe completely.

Then, cut individual strips a little longer the the toe itself. Place them just like before. Be sure to cover the toe completely.

7
Then, do the same to the back side.

Then, do the same to the back side.

8
When you are done get the scissors and cut the tape that is hanging off the toe. You will see the out line of the toe, just trim around it, don't cut the stick.

When you are done get the scissors and cut the tape that is hanging off the toe. You will see the out line of the toe, just trim around it, don't cut the stick.

9
If you have wax, cover the whole stick with it, backside, frontside, and the bottom so it's nice and sticky.

If you have wax, cover the whole stick with it, backside, frontside, and the bottom so it's nice and sticky.

10
Then your stick will look like this.

Then your stick will look like this.

keyboard shortcuts:     previous step     next step
Comments
0 COMMENTS
View More Comments