Remove printer from the box
Open the user manual pack and check all components are in the box
Contents should be: x2 manuals, x1 CD, x3 A4 sheets, AC cable & plug, CD tray, ink cartridges
Check parts codes against released parts list
Remove all internal & external packaging/tape.
Check document cover colour.
Open document cover
Open scanner cover. Check ink cartridge seal & repair seal are in place.
Plug in the printer to AC supply, and turn it on.
Check upper User Interface (UI) panel lights up.
These are the seals that you need to find
Open front cover. Pull out paper support tray fully. Push down CD lever (LHS, grey)
Pull out gently
Check front panel nomenclature is there.
Check for any scratches/dents/damage.
Check rear paper feed tray. Find caution seal
Caution seal on rear paper feed
Find serial number seal on the back of the unit and read it to Production Planning Manager (Keiko Shiohara)
Serial number on back of unit
Check that appropriate Trademarks are on this seal
Check body fairings are flush & corners smooth