How to Make Your Own Stickers

For this guide I'm using painters tape to show you how to make your very own stickers/labels. Just make sure you don't use the really sticky ones to avoid residue if you wish to remove.

2.5k Views 89 Likes
How to Make Your Own Stickers
17 Steps
Supplies
Embed
1
Supplies needed

Supplies needed

2
Cut pc of tape according to size of sticker you wish to create. U can choose to use separate pcs or 1 long pc depending on your letters/design.  Remember that the longer the pc the easier it will tear

Cut pc of tape according to size of sticker you wish to create. U can choose to use separate pcs or 1 long pc depending on your letters/design. Remember that the longer the pc the easier it will tear

Recommended For You
3
Place your pc of tape on a clean cutting area or board gently.  You want to make it easy to remove without tearing once you cut out your pattern

Place your pc of tape on a clean cutting area or board gently. You want to make it easy to remove without tearing once you cut out your pattern

4
I chose to do my daughters name all together.  This will lift up all in one piece

I chose to do my daughters name all together. This will lift up all in one piece

5
Cut with x-acto knife.  As usual pls be careful when using sharp objects to avoid cutting yourself or damaging cutting area if not using a board

Cut with x-acto knife. As usual pls be careful when using sharp objects to avoid cutting yourself or damaging cutting area if not using a board

6
All cut.  I will be lifting outer area of pattern

All cut. I will be lifting outer area of pattern

7
Sample video.  Careful not to tear design

Sample video. Careful not to tear design

8
Cut pattern

Cut pattern

9
Use knife to lift from surface

Use knife to lift from surface

10
Will be using my daughters laptop for sticker placing

Will be using my daughters laptop for sticker placing

11
Lift carefully

Lift carefully

12
Placing video

Placing video

13
There it is.  Make sure to rub a couple of times gently so it can stick good

There it is. Make sure to rub a couple of times gently so it can stick good

14
Close up

Close up

15
You can even use the leftover pcs to add more to design to your finished product

You can even use the leftover pcs to add more to design to your finished product

16
Left over pcs well used.  You're the creator so get creative.  Hope you guys like this guide

Left over pcs well used. You're the creator so get creative. Hope you guys like this guide

17
"Kat"

"Kat"

keyboard shortcuts:     previous step     next step
Comments
0 COMMENTS
View More Comments