How to Make Under the Shelf Stemware Rack

4.6k Views 238 Likes 9 Comments
How to Make Under the Shelf Stemware Rack
6 Steps
Supplies
Embed
1
You'll need a flat wooden stick and rods. Measure your shelf  for the length of the rack. I got a 30" wood  strip. I got three 48" circular rods and got them cut to 8" pieces at Lowes

You'll need a flat wooden stick and rods. Measure your shelf for the length of the rack. I got a 30" wood strip. I got three 48" circular rods and got them cut to 8" pieces at Lowes

2
Tools you will need

Tools you will need

Recommended For You
3
I marked the back of my stick, so it wouldn't show. Leave two inch space on either end. For supports you should have 1.5" space to ensure the glass holds and 2.5" spacing between two supports

I marked the back of my stick, so it wouldn't show. Leave two inch space on either end. For supports you should have 1.5" space to ensure the glass holds and 2.5" spacing between two supports

4
Use hammer to nail the rod pieces to the back support. I first drilled hold at the markings to ensure correct placements of the rods and then began hammering

Use hammer to nail the rod pieces to the back support. I first drilled hold at the markings to ensure correct placements of the rods and then began hammering

5
And we're done. You may paint it. I didn't, since it is under the shelf and most of it doesn't show :)

And we're done. You may paint it. I didn't, since it is under the shelf and most of it doesn't show :)

6
Screw on the wall under the shelf

Screw on the wall under the shelf

keyboard shortcuts:     previous step     next step
Comments
9 COMMENTS
View More Comments