How to Make DIY Spider Cups

Creepy crawly DIY Halloween spider cups are perfect for a Halloween party or for a fun Halloween craft to make with the kids!

153 Views 11 Likes
How to Make DIY Spider Cups
3 Steps
Supplies
Embed
1
Measure 1 1/2 inches high from the bottom of the horizontal paper. Draw a straight line across the bottom of the paper. Measure 1 1/2 inches in from both sides and start cutting out the spider legs.

Measure 1 1/2 inches high from the bottom of the horizontal paper. Draw a straight line across the bottom of the paper. Measure 1 1/2 inches in from both sides and start cutting out the spider legs.

2
Leave 1/2 inch between each leg. Start wide and taper the leg to a thin point at the end, then wrap the base of the paper with the legs pointing up, around the cup. Secure the sides with glue.

Leave 1/2 inch between each leg. Start wide and taper the leg to a thin point at the end, then wrap the base of the paper with the legs pointing up, around the cup. Secure the sides with glue.

Recommended For You
3
Note – If the cup you use is wider on the top than it is on the bottom you might want to trim the edges at an angle so when you wrap it the lines match up evenly in the back.

Note – If the cup you use is wider on the top than it is on the bottom you might want to trim the edges at an angle so when you wrap it the lines match up evenly in the back.

keyboard shortcuts:     previous step     next step
Comments
0 COMMENTS
View More Comments