How to Make a Yarn Bracelet

by ѕσρнια ∂єlσѕ ѕαитσѕ

This must be a Paracord bracelet but, I'm in need of supplies so. Yea. I used yarn and super glue instead of paracord and a lighter. lol.

Supplies

  • 1 Tape
  • 1 Scissors
  • 1 Super glue
  • 3 Feet Base yarn
  • 4 Feet Yarn or...
  • 2 Feet Two colored yarns.
  • 1 Ruler
  • Time
  • Patience
  • Instructions

    Step 1

    You'll need: Tape, scissors, super glue, yarn(s), ruler and a flat surface.

    Step 2

    Measure your yarn(s). If you're gonna use 1 colored yarn, measure it to 4 ft. If you're gonna use 2 colored yarns, measure it to 2 ft each. 1 to 12 inches twice is 2 ft.

    Step 3

    Tie them together.

    Step 4

    Put super glue on it so that it will harden. Let it dry.

    Step 5

    Measure the base yarn to 3 ft. Thrice the 1 to 12 inches.

    Step 6

    Fold the base yarn in half. Tape it on a flat surface.

    Step 7

    Let's go back to the glued yarns. If it's dry trim it.

    Step 8

    Like this. Trim more if you want.

    Step 9

    Place it on the middle of the base.

    Step 10

    Red=1 Blue=2. If you want 1 to be on the middle portion, work with it first. If you want 2 to be on the middle portion, work on it first. Any color of your choice.

    Step 11

    Make the yarns like this. Look at it closely. The pull it up.

    Step 12

    It will look like this.

    Step 13

    Then continue it. But start with 1, the color you want to be on the middle portion.

    Step 14

    Make the yarns look like this again. Then pull it towards the knot you just made. Then continue.

    Step 15

    After doing some knots, it will look like this.

    Step 16

    Step 17

    Knot it until it fits your wrist.

    Step 18

    Put glue on the last knot so it will be secured.

    Step 19

    Make 1 overhand knot.

    Step 20

    Then put glue on it.

    Step 21

    Cut the excess when it's dried.

    Step 22

    The best part is, that there's two sides. This side and...

    Step 23

    ..this side. I like this part 'cause it looks cool.

    Step 24

    Insert the overhand knot you just made in the loop and you're done. If it slips, then make an adjustable knot. Or make some adjustments so that it will not slip again.

    Step 25

    Then there you have it! I've made another one too, with neon colors :) Oooooh. Show it to your friends. And if they liked it make them one too. Or you could just teach them how to make it. lol.

    Step 26

    Have fun!

    Step 27

    Heyooo. Want some more origami guides? Or some stuff-like guides? Come and follow me. Have an origami request? Don't be afraid to tell me your origami request. I accept origami requests.