How to Make a Wired Stone Ring

3.4k Views 244 Likes
How to Make a Wired Stone Ring
10 Steps
Supplies
Embed
1
For this ring you will need a thin wire that is very flexible&a stone of choice. Bc the wire is thin, you can easily cut it with normal scissors, but if you have a special one by all means... Use it!

For this ring you will need a thin wire that is very flexible&a stone of choice. Bc the wire is thin, you can easily cut it with normal scissors, but if you have a special one by all means... Use it!

2
Choose the finger of choice and wrap wire for size(but don't cut the wire!!). The more times you wrap it, the cooler the effect

Choose the finger of choice and wrap wire for size(but don't cut the wire!!). The more times you wrap it, the cooler the effect

Recommended For You
3
If you want, you can shape the wire on a cylinder object

If you want, you can shape the wire on a cylinder object

4
Depending on your wire it may not stay and will look like this. But don't worry! We'll make this bad boy stay

Depending on your wire it may not stay and will look like this. But don't worry! We'll make this bad boy stay

5
Before you cut, Leave an extra amount of wire behind to wrap around the stone. Depends on how big your stone is, but just to be safe, leave about a foot of extra wire

Before you cut, Leave an extra amount of wire behind to wrap around the stone. Depends on how big your stone is, but just to be safe, leave about a foot of extra wire

6
Bunch wire together. Grab the smallest end and wrap it around the bunch(make sure the ends not sticking downward unless you want to cut yourself)

Bunch wire together. Grab the smallest end and wrap it around the bunch(make sure the ends not sticking downward unless you want to cut yourself)

7
With the long wire, wrap it around the bunch so it won't awkwardly try to unshape itself. Reshape it circularly if it gets jagged

With the long wire, wrap it around the bunch so it won't awkwardly try to unshape itself. Reshape it circularly if it gets jagged

8
Now on the part where you first wrapped the short end around the bunch, place the stone there. You can either hot glue it in place or strategically wrap the wire around it and secure it in place

Now on the part where you first wrapped the short end around the bunch, place the stone there. You can either hot glue it in place or strategically wrap the wire around it and secure it in place

9
Now wear it!

Now wear it!

10
keyboard shortcuts:     previous step     next step
Comments
0 COMMENTS
View More Comments