How to Make a Vase, of a Dead Lightbulb

2.8k Views 140 Likes
How to Make a Vase, of a Dead Lightbulb
8 Steps
Supplies
Embed
1
Use a knife to cut open the bulb. Cut as close as possible to the black center

Use a knife to cut open the bulb. Cut as close as possible to the black center

2
Be very careful!! Remove the loose part. Its a wire inside, so You have to pull a bit hard, but dont squeeze the bulb!!!

Be very careful!! Remove the loose part. Its a wire inside, so You have to pull a bit hard, but dont squeeze the bulb!!!

Recommended For You
3
4
See the glass sticking out? We are now going to break glass. Peaces of glass may break loose from inside, so be careful

See the glass sticking out? We are now going to break glass. Peaces of glass may break loose from inside, so be careful

5
Ok. As You break apar the inside, You also bend the edges on top so it loose better, and dont Get too sharp. Its not hard breaking the glass at all, but it looks like it, cause i have to be gentle

Ok. As You break apar the inside, You also bend the edges on top so it loose better, and dont Get too sharp. Its not hard breaking the glass at all, but it looks like it, cause i have to be gentle

6
Empty!!! Make shure all glass pieces are out!

Empty!!! Make shure all glass pieces are out!

7
Paint it if u like

Paint it if u like

8
Decoupage it with Nice napkins if You have some;) make shure to place 4 pieces of gluegun glu under to make it stand ;)

Decoupage it with Nice napkins if You have some;) make shure to place 4 pieces of gluegun glu under to make it stand ;)

keyboard shortcuts:     previous step     next step
Comments
0 COMMENTS
View More Comments