How to Make a Sorting Box for Gerriann's Cutting Guides

This Tutorial will create a sorting box for Gerriann's Cutting Guides for cutting guides from CTMH Make It From Your Heart Vol 1 and Vol 2. www.scrapandstampcreations.bl…

1.2k Views 62 Likes
How to Make a Sorting Box for Gerriann's Cutting Guides
21 Steps
Supplies
Embed
1
Cut your chipboard pieces as shown.   Bottom: 5 X 7.5 inches, Long Sides: 2.5 X 7.5 inches (2), Short Sides 2.5 X 5 (2)

Cut your chipboard pieces as shown. Bottom: 5 X 7.5 inches, Long Sides: 2.5 X 7.5 inches (2), Short Sides 2.5 X 5 (2)

2
created your construction strips at least 1" wide and scored down the middle at 1/2". Add Scor-Tape on each side of strips.

created your construction strips at least 1" wide and scored down the middle at 1/2". Add Scor-Tape on each side of strips.

Recommended For You
3
Attach one side of the construction strips to the bottom of box on each side

Attach one side of the construction strips to the bottom of box on each side

4
Attach the chipboard sides of box to the bottom of the box with construction strips

Attach the chipboard sides of box to the bottom of the box with construction strips

5
Add small construction strips to the side chipboard pieces. Adhere all sides together to create a box with the construction strips on the inside of the box.

Add small construction strips to the side chipboard pieces. Adhere all sides together to create a box with the construction strips on the inside of the box.

6
Add construction strips to cover the seams of the box on the outside of the box.  Miter the corners.

Add construction strips to cover the seams of the box on the outside of the box. Miter the corners.

7
Inside of box showing construction strips and outside stripes being added.

Inside of box showing construction strips and outside stripes being added.

8
Add construction strips to the sides of the outside of the box as well.

Add construction strips to the sides of the outside of the box as well.

9
Add construction strips to the top of the box to cover the chipboard edges.

Add construction strips to the top of the box to cover the chipboard edges.

10
See top of finished box.

See top of finished box.

11
for each of the 12 envelopes seal each envelope well.

for each of the 12 envelopes seal each envelope well.

12
add extra adhesive to the flap piece

add extra adhesive to the flap piece

13
once the envelope is sealed cut off 1/8" from the top of the envelope to create an opening

once the envelope is sealed cut off 1/8" from the top of the envelope to create an opening

14
Using your Scoring Board- score at 1/4" on each of the non-cut sides.

Using your Scoring Board- score at 1/4" on each of the non-cut sides.

15
Fold on the score lines and crease well.

Fold on the score lines and crease well.

16
make gussets by creating a valley fold with the envelopes original edge.

make gussets by creating a valley fold with the envelopes original edge.

17
cut the corners at an angle on the 2 corners that are intact to make it easier to create the gussets.

cut the corners at an angle on the 2 corners that are intact to make it easier to create the gussets.

18
Do this for all 12 envelopes

Do this for all 12 envelopes

19
Add Scor-Tape to the top and bottom of each envelope to create an accordian for inside the box.

Add Scor-Tape to the top and bottom of each envelope to create an accordian for inside the box.

20
Attache the envelopes together making sure that the bottom is flush.

Attache the envelopes together making sure that the bottom is flush.

21
Completed accordion envelopes. Add to box and embellish as desired.

Completed accordion envelopes. Add to box and embellish as desired.

keyboard shortcuts:     previous step     next step
Comments
0 COMMENTS
View More Comments