How to Make a Sleigh Ornament With AlphaStamps Supplies

Create a reindeer & sleigh ornament with products from AlphaStamps.com Check out the project blog post for additional details and product links: goo.gl/IFX4q6

188 Views 30 Likes
How to Make a Sleigh Ornament With AlphaStamps Supplies
14 Steps
Supplies
Embed
1
Prep all of your pieces with a coat of white acrylic paint or gesso. You don't have to super neat about it. Just give it a good sloppy coat of paint.

Prep all of your pieces with a coat of white acrylic paint or gesso. You don't have to super neat about it. Just give it a good sloppy coat of paint.

2
Apply decorative paper to the larger pieces like so. I've used paper from Authentique's 6x6 Christmastime bundle.

Apply decorative paper to the larger pieces like so. I've used paper from Authentique's 6x6 Christmastime bundle.

Recommended For You
3
Assemble the sleigh by gluing the front, floor and back pieces to the large side pieces.

Assemble the sleigh by gluing the front, floor and back pieces to the large side pieces.

4
Apply the same decorative paper to the remaining exterior surfaces.

Apply the same decorative paper to the remaining exterior surfaces.

5
Apply some complimentary paper to the inside of the sleigh.

Apply some complimentary paper to the inside of the sleigh.

6
Add some snippets of trim.

Add some snippets of trim.

7
Now apply those swirly frames to the outside of the sleigh and touch up any edges with paint.

Now apply those swirly frames to the outside of the sleigh and touch up any edges with paint.

8
Add a bit of sparkle with some clear glitter.

Add a bit of sparkle with some clear glitter.

9
Next, using some acrylic paint, make your deer cutouts look more... well... deer like.

Next, using some acrylic paint, make your deer cutouts look more... well... deer like.

10
Attach a length of wired Red Pip Berry Garland to the sleigh, then glue the deer on to the wire.

Attach a length of wired Red Pip Berry Garland to the sleigh, then glue the deer on to the wire.

11
Apply a short lengths of wire perpendicular, across the front of the deer, for stability. You can add a bit more glitter too... because GLITTER!

Apply a short lengths of wire perpendicular, across the front of the deer, for stability. You can add a bit more glitter too... because GLITTER!

12
It is likely that weight of the deer will tip your sleigh forward. Fill the sleigh with a little sack of presents to weigh it down and keep it in place.

It is likely that weight of the deer will tip your sleigh forward. Fill the sleigh with a little sack of presents to weigh it down and keep it in place.

13
Your sleigh is ready to fly!

Your sleigh is ready to fly!

14
Hang from the ceiling, place in the tree, or sit on a shelf.

Hang from the ceiling, place in the tree, or sit on a shelf.

keyboard shortcuts:     previous step     next step
Comments
0 COMMENTS
View More Comments