How to Make a Siblings Shrine With Louise

Louise was inspired to create her version of a Sarcophagus using the fabulous cast resin Egg Shrine. The story is very compelling please visit the Muse to read it

185 Views 19 Likes
How to Make a Siblings Shrine With Louise
6 Steps
Supplies
Embed
1
Using a strip of palster of paris approximately 5cm wide and 50cms long moisten in warm water and then apply to resin egg around inside edge, along rim, as depicted above.

Using a strip of palster of paris approximately 5cm wide and 50cms long moisten in warm water and then apply to resin egg around inside edge, along rim, as depicted above.

2
Using 3 small plastic skeletons, dismember them and arrange them in the egg, glueing the torso’s and limbs with strong glue

Using 3 small plastic skeletons, dismember them and arrange them in the egg, glueing the torso’s and limbs with strong glue

Recommended For You
3
Give whole project with a light coat of spray gesso and allow to dry.

Give whole project with a light coat of spray gesso and allow to dry.

4
Using a small paint brush apply crackle medium to the outside of the egg, the rim of the egg and random parts of the plastic skeletons. Allow to dry.

Using a small paint brush apply crackle medium to the outside of the egg, the rim of the egg and random parts of the plastic skeletons. Allow to dry.

5
Apply a coat of dark mist to highlight the cracks in the crackle medium and allow to dry. More on the story www.sandraevertson.con

Apply a coat of dark mist to highlight the cracks in the crackle medium and allow to dry. More on the story www.sandraevertson.con

6
Apply a light coat of spray gesso to soften the dark colour of the spray mist.

Apply a light coat of spray gesso to soften the dark colour of the spray mist.

keyboard shortcuts:     previous step     next step
Comments
0 COMMENTS
View More Comments