How to Make a Reversable Tree Skirt

Christmas is coming !!

204 Views 16 Likes
How to Make a Reversable Tree Skirt
17 Steps
Supplies
Embed
1
Gather your supplies

Gather your supplies

2
Make a template by folding the paper in half

Make a template by folding the paper in half

Recommended For You
3
Draw a line 1.5 inches down from folded corner

Draw a line 1.5 inches down from folded corner

4
Draw a second line 18 inches down from same corner

Draw a second line 18 inches down from same corner

5
Cut along both lines

Cut along both lines

6
Open paper out and place straight edge on fold of main fabric. Repeat on batting

Open paper out and place straight edge on fold of main fabric. Repeat on batting

7
Cut an opening from outer circle to neck in main piece and batting

Cut an opening from outer circle to neck in main piece and batting

8
Fold paper template in half and half again to give a segment template . Cut 2 of each of the 4 fabrics adding  .25 inch seam allowance

Fold paper template in half and half again to give a segment template . Cut 2 of each of the 4 fabrics adding .25 inch seam allowance

9
Sew segments together in an alternating pattern and press seams open

Sew segments together in an alternating pattern and press seams open

10
Layer and pin batting and main fabric pieces. Pin and sew lace around outer edge as close the edge as you can

Layer and pin batting and main fabric pieces. Pin and sew lace around outer edge as close the edge as you can

11
Turn lace back on itself to finish at the ends

Turn lace back on itself to finish at the ends

12
Lay the segmented piece on top of lace trimmed back and pin in place . Sew all around from batting side leaving a 6 inch gap in one of the opening sides. Make sure the lace is tucked in

Lay the segmented piece on top of lace trimmed back and pin in place . Sew all around from batting side leaving a 6 inch gap in one of the opening sides. Make sure the lace is tucked in

13
Trim excess and make notches in neck before turning right side out through the 6 inch gap

Trim excess and make notches in neck before turning right side out through the 6 inch gap

14
Sew gap closed and press . Sew down each segment seam

Sew gap closed and press . Sew down each segment seam

15
Cut ribbon into 6 equal lengths and sew in place , 3 matching pairs spaced as shown

Cut ribbon into 6 equal lengths and sew in place , 3 matching pairs spaced as shown

16
All ready for the tree or use the reverse side

All ready for the tree or use the reverse side

17
Reverse side

Reverse side

keyboard shortcuts:     previous step     next step
Comments
0 COMMENTS
View More Comments