How to Make a Quote Wood Sign

by R Roe

Choose from a variety of quotes to create a custom wood sign that speaks to you!

Instructions

Step 1

Sign registration waiver. Put on apron and pick out any paints and paint brushes you want to use for your project.

Step 2

Pick out the stencil you want to use for your board. Make sure it has clean edges before selecting.

Step 3

You may paint the background of your pallet board if you'd like. Painting base a solid color is recommended if you aren't used to stenciling, as stencils can bleed and this allows for easy touch up.

Step 4

Allow base to dry if painted.

Step 5

Place stencil on your board and tape it down with masking tape (located on your table caddy).

Step 6

Start painting inside of your stencil and peel off stencil when you're done. Do not allow to dry fully.

Step 7

Remove stencil while paint is till wet and set aside. Wipe stencil off with a baby wipe, located in table caddy so that the next person may also enjoy it.

Step 8

If any paint has seeped through the stencil, use a thin brush to touch up after paint has dried.

Step 9

STAFF ONLY: LOCATION: WOOD SHELVING. STENCILS ARE IN BINDERS ON WOOD SHELF

Step 10

Less is more. Scrape paint dauber on side of paint container before applying. Apply by stippling up & down-not side to side.Use fingers to hold down inside portions of stencil to prevent bleeding.