How to Make a Pot Rack

by Elisabeth Duclos

Supplies

  • 1 Cookie baking rack
  • 8 Feet Small chain
  • 20 S hooks
  • 6 Feet 1"x3" shelving board
  • 4 Towel hooks/ hangers
  • 1 Mitre saw, table saw, circular saw, or hand brush
  • Wood screws & washers
  • Paint brush
  • Polyurethane wood finish
  • Wood stain
  • Bolt cutter
  • Pliers
  • Drill & hammer
  • Nails & screws
  • Wood glue
  • Instructions

    Step 1

    1. Get a cookie rack. Trim off sides with a grinder, bolt cutter, or hack saw.

    Step 2

    2. Measure outside length.

    Step 3

    3. Make cuts for outer frame.

    Step 4

    4. Measure other sides, then cut side pieces to that length.

    Step 5

    5. Put frame together, but not glued or nailed yet, make marks for holes that will be used to hold rack in the place. Then drill holes.

    Step 6

    6. After drilling holes, put rack in the holes drilled and then add other boards and nail frame together.

    Step 7

    7. Almost done.

    Step 8

    8. Cut chains to length. Cut 4 to hang rack, and as many others to hang pots. Then attach S hooks at each end.

    Step 9

    9. Use pliers to close hooks. Note: close both ends on longer chains to hang the rack.

    Step 10

    10. Next add a simple hanger. Use longer screws to attach chains that will be used to hang the rack.

    Step 11

    This is what the longer screws are for FYI. So don't worry if you think you messed up.

    Step 12

    11. Hang and you're all done!!(: