How to Make a Picture Frame Jewellery Holder.

2.8k Views 343 Likes
How to Make a Picture Frame Jewellery Holder.
7 Steps
Supplies
Embed
1
Supplies that you might need.

Supplies that you might need.

2
Firstly take picture frame apart so that you can add a back ground to it..

Firstly take picture frame apart so that you can add a back ground to it..

Recommended For You
3
You can use any picture, poster or photo of your choice.. I used some wrapping paper and  drew round the back frame for correct size. Place the glass back in frame and clip the back on...

You can use any picture, poster or photo of your choice.. I used some wrapping paper and drew round the back frame for correct size. Place the glass back in frame and clip the back on...

4
Measure where you want your sticky hooks to go and line them up using masking tape as a guide.

Measure where you want your sticky hooks to go and line them up using masking tape as a guide.

5
Once you are happy with the position stick them on to  the glass... Please note don't push them down too hard on to the glass like I did and I broke the glass... Please be careful..

Once you are happy with the position stick them on to the glass... Please note don't push them down too hard on to the glass like I did and I broke the glass... Please be careful..

6
Once happy add your jewellery to the frame.. Make sure you have them even as when you hang it on the wall it might hang heavy on one side...

Once happy add your jewellery to the frame.. Make sure you have them even as when you hang it on the wall it might hang heavy on one side...

7
Place on a wall of you choice.. You can always add bits and bobs to it.. This is only a guide. Hope you like it.. :)

Place on a wall of you choice.. You can always add bits and bobs to it.. This is only a guide. Hope you like it.. :)

keyboard shortcuts:     previous step     next step
Comments
0 COMMENTS
View More Comments