How to Make a Penholder

Make the penholder with the use of leather.

806 Views 49 Likes
How to Make a Penholder
14 Steps
Supplies
Embed
1
Prepare the slender leather.

Prepare the slender leather.

2
Cut out the leather with a leather cutter.  Be careful not to cut your fingers!

Cut out the leather with a leather cutter. Be careful not to cut your fingers!

Recommended For You
3
Apply oil to the leather edge and polish it with the stick of the wood.

Apply oil to the leather edge and polish it with the stick of the wood.

4
Prepare a model of the oval.

Prepare a model of the oval.

5
Wind the slender leather around the model of the oval.

Wind the slender leather around the model of the oval.

6
Glue the leather together using elastomeric adhesive which is used to glue leather.

Glue the leather together using elastomeric adhesive which is used to glue leather.

7
Draw a line to show the sewing line.  At this time, draw a line about 0.1 inch away the sewing line from the edge.

Draw a line to show the sewing line. At this time, draw a line about 0.1 inch away the sewing line from the edge.

8
Pierce it with a hammer on the sewing line.

Pierce it with a hammer on the sewing line.

9
Prepare the leather of the circle.Use this as a pedestal. Use this as a pedestal.

Prepare the leather of the circle.Use this as a pedestal. Use this as a pedestal.

10
Sew it with a thread. Use the thread which I pulled with solder.

Sew it with a thread. Use the thread which I pulled with solder.

11
After the glue has dried, sew it with the wax cord.

After the glue has dried, sew it with the wax cord.

12
Make a hole to put a pen.

Make a hole to put a pen.

13
Sew together Ring-Leather with the pedestal.

Sew together Ring-Leather with the pedestal.

14
You have completed your project.  Congratulations!! http://youtu.be/eqQe4vgMFD4

You have completed your project. Congratulations!! youtu.be/eqQe4vgMFD4

keyboard shortcuts:     previous step     next step
Comments
0 COMMENTS
View More Comments