How to Make a Napkin Holder

1.9k Views 52 Likes
How to Make a Napkin Holder
12 Steps
Supplies
Embed
1

Make sure to look at the supplies before you begin.

2

First, cut 3 equal lengths out of the white pine

Recommended For You
3
Make a 30 degree line (from horizontal short end) on two pieces of the wood.

Make a 30 degree line (from horizontal short end) on two pieces of the wood.

4
Looks like this.

Looks like this.

5
Electric skill saw.

Electric skill saw.

6
Make a 90 degree cut (along the horizontal) on the third piece of wood.

Make a 90 degree cut (along the horizontal) on the third piece of wood.

7
Sand each piece down.

Sand each piece down.

8
The three cut pieces look like this.

The three cut pieces look like this.

9
Drill pilot holes into each piece like so.

Drill pilot holes into each piece like so.

10
Screw pieces making sure the bottom is flush so it doesn't wobble on a flat surface.

Screw pieces making sure the bottom is flush so it doesn't wobble on a flat surface.

11
Final product!

Final product!

12
W/ napkins! : D

W/ napkins! : D

keyboard shortcuts:     previous step     next step
Comments
0 COMMENTS
View More Comments