How to Make a Name Plaque for Your Son or Daughter

1k Views 128 Likes
How to Make a Name Plaque for Your Son or Daughter
7 Steps
Supplies
Embed
1
Cut 2x4 to desired length depending on the length of the name. Stain the 2x4 with the desired color and allow for the stain to properly dry (24hours).

Cut 2x4 to desired length depending on the length of the name. Stain the 2x4 with the desired color and allow for the stain to properly dry (24hours).

2

Remove the stands from the back of the frames. Note: cheap frames will do best for this craft.

Recommended For You
3

Then look for lettering online or on your computer software to add to the frames.

4
Position the letters in the frame.

Position the letters in the frame.

5
CAREFULLY! Add a large drop of glue on the back of each frame. Note: glue may take a while to set. So, take your time with each piece. 30 to 60 minutes to dry.

CAREFULLY! Add a large drop of glue on the back of each frame. Note: glue may take a while to set. So, take your time with each piece. 30 to 60 minutes to dry.

6
Voila! The finished product.

Voila! The finished product.

7
It is good to mention that you can use any type of scrap wood and size frame. I just used what I had available. Also, I chose stain, but paint will do as well. Enjoy!

It is good to mention that you can use any type of scrap wood and size frame. I just used what I had available. Also, I chose stain, but paint will do as well. Enjoy!

keyboard shortcuts:     previous step     next step
Comments
0 COMMENTS
View More Comments