How to Make a Mini Candle Holder

How to make a mini candle holder

63 Views 2 Likes
How to Make a Mini Candle Holder
20 Steps
Supplies
Embed
1
This is the equipment you need

This is the equipment you need

2
1. Use a metal ruler to make a square

1. Use a metal ruler to make a square

Recommended For You
3
2. After, cut the square with the gullitene

2. After, cut the square with the gullitene

4
3. Then find the centre of the by doing two diagonal lines from two corners of the square

3. Then find the centre of the by doing two diagonal lines from two corners of the square

5
4. Where the lines meet, you put a mark with the centre punch so it is easier to drill

4. Where the lines meet, you put a mark with the centre punch so it is easier to drill

6
5. Next you mark a circle using a compass

5. Next you mark a circle using a compass

7
6. Once you have marked the circle you cut in with the tin snips

6. Once you have marked the circle you cut in with the tin snips

8
7. Once you have cut the circle you file the parts that are either Pointy or sharp so it can be smooth

7. Once you have cut the circle you file the parts that are either Pointy or sharp so it can be smooth

9
8. After that, you drill through the centre punch mark you made with the drill.

8. After that, you drill through the centre punch mark you made with the drill.

10
9. After, use a tin mans Mallet to make the shape of your dish

9. After, use a tin mans Mallet to make the shape of your dish

11
10. Then with your flatbar, you do two lines across

10. Then with your flatbar, you do two lines across

12
11. Then you file your flatbar

11. Then you file your flatbar

13
12.  Once you have marked and fi,ed you drill the centre

12. Once you have marked and fi,ed you drill the centre

14
13. After that, you measure and mark about one centre meter from one of the sides.

13. After that, you measure and mark about one centre meter from one of the sides.

15
14. You then use a scroll scrape to shape the handle of your holder

14. You then use a scroll scrape to shape the handle of your holder

16
15. Where the centimetre you marked you drill

15. Where the centimetre you marked you drill

17
16. Then you bend the flat bar slightly with the vice and a metal hammer

16. Then you bend the flat bar slightly with the vice and a metal hammer

18
17. You then put all together and put the rivet screw through all holes

17. You then put all together and put the rivet screw through all holes

19
18. You then use the pop rivet gun to put all together and finish

18. You then use the pop rivet gun to put all together and finish

20
Final product

Final product

keyboard shortcuts:     previous step     next step
Comments
0 COMMENTS
View More Comments