How to Make a Hockey Gear Stand

by Steven P

Supplies

  • 9 1-1/2" Pvc Caps
  • 2 1-1/2" PVC Elbows
  • 1 1-1/2" PVC cross (4 hole joint)
  • 5 1-1/2" PVC Tees
  • 2 Spring clips
  • 1 Hook
  • 2 8' 1-1/2" PVC pipe
  • Instructions

    Step 1

    The finished product

    Step 2

    Make sure to cut the 7 - 7" pcs. and the 2 - 18" pcs. off of one of the 8' pipes and the rest off the other 8' Pc.

    Step 3

    The measurements for the top

    Step 4

    Measurements for bottom

    Step 5

    Add any type of clip to hold shin pads.

    Step 6

    Add a hook on the middle pipe to hold the pants.

    Step 7

    You can choose to screw together joints for stability or just hand tighten for easy disassembly in the offseason.

    Step 8

    (Optional) Customize with air cooling. Replace the PVC Tee with the 4 hole joint.

    Step 9

    Drill strategic holes in pipe to allow airflow into gear for faster drying.

    Step 10

    Holes on caps

    Step 11

    Good luck in your season and go Blackhawks.