How to Make a Glasses Case

by Yasushi Ishikawa

Leather material gives it a more luxurious feel!!

Instructions

Step 1

Watch a video version of this guide!! http://www.youtube.com/watch?v=nPDVjOFfjDg&list=UU3Hnjip1IxKb4eRDU53XuZg

Step 2

Prepare the template that is larger than the actual size of the glasses.

Step 3

Cut out the leather with a leather cutter. Be careful not to cut your fingers!

Step 4

These are all the materials you will need to complete the project.

Step 5

Draw a line to show the sewing line.At this time, draw a line about 0.1 inch away the sewing line from the edge.

Step 6

Apply oil to the leather edge and polish it with the stick of the wood.

Step 7

At this time, draw a line on the glasses to make the sewing line.Pierce it with a hammer on the sewing line.

Step 8

Sew it with a thread. Use the thread which I pulled with solder.

Step 9

Sew it with the wax cord.

Step 10

Glue the belt together using elastomeric adhesive which is used to glue leather.

Step 11

After the glue has dried, sew it with the wax cord.

Step 12

Apply oil to the leather edge and polish it with the stick of the wood.

Step 13

There is an inside pocket.

Step 14

You have completed your project.Congratulations!! http://www.youtube.com/watch?v=nPDVjOFfjDg&list=UU3Hnjip1IxKb4eRDU53XuZg