How to Make a Framed Wall Hanging Jewelry Display

Any questions just ask☺️👌

1.4k Views 241 Likes
How to Make a Framed Wall Hanging Jewelry Display
31 Steps
Supplies
Embed
1
Pick out a frame and separate the pieces of it

Pick out a frame and separate the pieces of it

2
Cut a piece of fabric that is a couple inches wider and longer than the backboard of the frame

Cut a piece of fabric that is a couple inches wider and longer than the backboard of the frame

Recommended For You
3
Center the fabric with the backboard based on your fabric's design and use glue dots to secure it in the middle

Center the fabric with the backboard based on your fabric's design and use glue dots to secure it in the middle

4
Flip it over and it should look something like this (mine looks a little off because I had to center the design of the fabric)

Flip it over and it should look something like this (mine looks a little off because I had to center the design of the fabric)

5
Put glue dots up the sides of the backboard

Put glue dots up the sides of the backboard

6
Then fold the sides of the fabric over (hot glue or duck tape probably would have worked as well)

Then fold the sides of the fabric over (hot glue or duck tape probably would have worked as well)

7
Fold over the other sides and secure them in place. (I used heavy duty tape but hot glue or other glues would also work)

Fold over the other sides and secure them in place. (I used heavy duty tape but hot glue or other glues would also work)

8
Once it dries, glue it to the inner part of your frame

Once it dries, glue it to the inner part of your frame

9
Flip it over and cut lace ribbon a little bit longer than the width of the backboard

Flip it over and cut lace ribbon a little bit longer than the width of the backboard

10
And now secure the ribbon on the back

And now secure the ribbon on the back

11
It should now look something like this👌

It should now look something like this👌

12
Cut 4 pieces of wood that fit into the frame and glue them together with wood glue (if you have questions feel free to ask)

Cut 4 pieces of wood that fit into the frame and glue them together with wood glue (if you have questions feel free to ask)

13
Pull out the wood once the glue dries (I waited a little over an hour) and you should now have a rectangular framey box thing

Pull out the wood once the glue dries (I waited a little over an hour) and you should now have a rectangular framey box thing

14
Now paint it black (I used spray paint but u don't have to)

Now paint it black (I used spray paint but u don't have to)

15
Use tape to secure the fabric covered backboard to to back of the frame

Use tape to secure the fabric covered backboard to to back of the frame

16
I also used some hot glue to secure the tape doen

I also used some hot glue to secure the tape doen

17
Like so

Like so

18
This is what the back of mine looked like

This is what the back of mine looked like

19
And the front!!!☺️😘♥️

And the front!!!☺️😘♥️

20
I forgot to take pics while I was making these, but I just cut pieces of wood the width of the frame, used the drill to make the small holes (where the earrings will go), & I spray painted them black

I forgot to take pics while I was making these, but I just cut pieces of wood the width of the frame, used the drill to make the small holes (where the earrings will go), & I spray painted them black

21
22
Put a drop of glue (I used strong shoe goo) on the edges of the wood sticks and place them on the inner rim of the frame

Put a drop of glue (I used strong shoe goo) on the edges of the wood sticks and place them on the inner rim of the frame

23
Like so

Like so

24
Now I have two done

Now I have two done

25
And now all four! (You don't have to do four)

And now all four! (You don't have to do four)

26
Well, so far we have a place for earrings, but where are we going to put necklaces and bracelets??

Well, so far we have a place for earrings, but where are we going to put necklaces and bracelets??

27
Place the mini white metal hooks about 2 inches apart for reference of where u will drill the holes for them

Place the mini white metal hooks about 2 inches apart for reference of where u will drill the holes for them

28
Now make little pencil marks on the bottom of the frame for reference

Now make little pencil marks on the bottom of the frame for reference

29
And then with a small drill, drill little holes for the hooks to go in

And then with a small drill, drill little holes for the hooks to go in

30
Now twist the hooks in the drilled holes and that's where the necklaces go!

Now twist the hooks in the drilled holes and that's where the necklaces go!

31
Now hang it up, put your jewelry on it, and admire your hard work☺️

Now hang it up, put your jewelry on it, and admire your hard work☺️

keyboard shortcuts:     previous step     next step
Comments
0 COMMENTS
View More Comments