How to Make a DIY Earring Display

8.3k Views 943 Likes
How to Make a DIY Earring Display
16 Steps
Supplies
Embed
1
Take the board from the back of your frame and trace it onto your decorative background paper (I used two sheets because my tissue paper is a tad transparent)

Take the board from the back of your frame and trace it onto your decorative background paper (I used two sheets because my tissue paper is a tad transparent)

2
Once you cut your paper..apply a thin coat of wood glue to the back frame (the side you usually put your picture up against)

Once you cut your paper..apply a thin coat of wood glue to the back frame (the side you usually put your picture up against)

Recommended For You
3
Rub out until smooth...."smoooothh as egggss"

Rub out until smooth...."smoooothh as egggss"

4
Apply a dot of wood glue to the center and all four corners of your board, then set your last sheet of paper on top (this step is if you need more than on sheet of background paper)

Apply a dot of wood glue to the center and all four corners of your board, then set your last sheet of paper on top (this step is if you need more than on sheet of background paper)

5
Assemble your frame so pressure will be applied while the glue dries. Leave alone for 10 min

Assemble your frame so pressure will be applied while the glue dries. Leave alone for 10 min

6
Once 10 min has passed..take your yarn or wire and wrap around your back board..

Once 10 min has passed..take your yarn or wire and wrap around your back board..

7
Attach the ends. If you're using wire just twist your two ends together

Attach the ends. If you're using wire just twist your two ends together

8

Meanwhile let's deal with our foam..this will be for your non hook or stud earrings

9
My mission to find styrofoam in my house was a fail, so I'm using an extra thick mattress foam

My mission to find styrofoam in my house was a fail, so I'm using an extra thick mattress foam

10
Cut to your desired size

Cut to your desired size

11
Take your paint and cover all sides of your foam (expect for back side)

Take your paint and cover all sides of your foam (expect for back side)

12
Blow dry completely

Blow dry completely

13
Apply a generous amount of wood glue to the unpainted back side

Apply a generous amount of wood glue to the unpainted back side

14
Position and place. Set a book on top for 10 min or so till dry and secure

Position and place. Set a book on top for 10 min or so till dry and secure

15
When putting your earrings in make sure they're at a downward angle..this will secure them

When putting your earrings in make sure they're at a downward angle..this will secure them

16
Hang all your earrings, stand back, and admire your work!! ;)

Hang all your earrings, stand back, and admire your work!! ;)

keyboard shortcuts:     previous step     next step
Comments
0 COMMENTS
View More Comments