Placing the bands
Go up to the second to last peg and go diagonally to the center. This is what it will look like.
Do the same to the other side, this is what it will look like.
Put your first colored band like so.
Put a new colored band on,
And another like so,
Put your next red band like this
Next purple band
And another purple
Now put the next purple on top of the last ted
And the other side
Do it all again
Do this all the way up.
This is what it will look like
For the last red,
You will only use two purples
Now flip so the red arrow is facing you.
Put a black triangle on the last three pegs
Hooking the bands
Grab the red band
And hook it up
Now grab the top purple band
And hook it diagonally down
Take the second purple band and hook it diagonally down the opposite way.
Now take the next band and hook it diagonally up the first way
And the opposite one
Now take the next red band and hook it straight up.
Do this all the way up
This is what it should look like
What the top will look like
Go back to the bottom and take the first black band and hook it diagonally up
Now go underneath the purples and grab the next black
Do that all the way up
Do the same to the other side
Now take your hook
And stick it through all of the bands at the top
Now grab another black band and put it on the hook
Pull the band through and put both sides on the hook
Now pull it off the loom, but keep the hook with the band on it.
Finishing the bracelet
Take the band
And cross the two sides of the band. Take the band underneath and pull it up. Take the hook off
Flip the bracelet around
Pull another band around it
Do what you did on the other side, knot it tightly
Take the c-clip
And hook it to the ends on both sides