How to Make a Cool Bracelet and Card Board Circle

Cute😘and fun to make!!!! Color on the cover pg is red,white,green,and yellow

How to Make a Cool Bracelet and Card Board Circle
24 Steps
Supplies
Embed
1

Card board circle:) *scissors *pencil *card board

2
Make the circles about the size of the painting palette plates

Make the circles about the size of the painting palette plates

Recommended For You
3
Do your best to cut out the circle

Do your best to cut out the circle

4
Use your scissors to make a hole in the middle of the circle.i didnt have scissors so i used a flat head screw driver thats fine to

Use your scissors to make a hole in the middle of the circle.i didnt have scissors so i used a flat head screw driver thats fine to

5
Make eight equal sections on the circle like so....

Make eight equal sections on the circle like so....

6
You don't have to put numbers I'm showing you the step before in a pic

You don't have to put numbers I'm showing you the step before in a pic

7
Okay, now cut about 1in on each line(8lines) so u can put the string in it later

Okay, now cut about 1in on each line(8lines) so u can put the string in it later

8
Get 4 colors 3 of them are gonna have 2 strings and one color is gonna have one like so...

Get 4 colors 3 of them are gonna have 2 strings and one color is gonna have one like so...

9

Part 2:) Bracelet *Scissors *string(7strands)[4colors] *time

10
Gather all the strings together and then put it in from the top of the circle and bring it out of the bottom then knot it it should stay in but if not make another knot thats fine as well.

Gather all the strings together and then put it in from the top of the circle and bring it out of the bottom then knot it it should stay in but if not make another knot thats fine as well.

11
Okay then organize them by color again and put them in the inch slots u will notice that there is one slot that will not have a string in there its fine thats how its supposed to be k

Okay then organize them by color again and put them in the inch slots u will notice that there is one slot that will not have a string in there its fine thats how its supposed to be k

12
Okay it should look like this and make sure that none of the strings over lap ea other or it will mess up

Okay it should look like this and make sure that none of the strings over lap ea other or it will mess up

13

Now were gonna actually start making the bracelet you have to pay very close attention okay or it will get a mess up

14
Okay line the open slot up with ur body(facing u)then do 3 over to its right and move the string that is the 3rd over to the open and the 3rd's slot will now be the open slot,repeat over&over like  so

Okay line the open slot up with ur body(facing u)then do 3 over to its right and move the string that is the 3rd over to the open and the 3rd's slot will now be the open slot,repeat over&over like so

15

Repeat that over until its long enough for ur wrist oh and pull it down not hard really soft so that u dont get all of the string stuck in the middle like~>~>~>~>~>~>~>

16
So pull it down like i did underneath but soft and make sure octopus tenticals  are not all tangled together like i also did

So pull it down like i did underneath but soft and make sure octopus tenticals are not all tangled together like i also did

17

So do this un ill its long enough for ur wrist like i said before and u'll be fine

18
And if you keep doing that it should come out like a pattern like so...

And if you keep doing that it should come out like a pattern like so...

19
These are a couple of my other bracelets

These are a couple of my other bracelets

20

So take it out when your done now you'll have a knot on one end and no knot on other and thats good bc you'll have to do something before its complete

21
Okay basically you can do any of these beads but the most recommendable on is the circle one

Okay basically you can do any of these beads but the most recommendable on is the circle one

22
This one

This one

23

Okay now get it and put it the string side that doesn't have a knot through it now u could put a knot on the other side now put it on put your hand through and lets hope it fits on your wrist

24

Okay i apologize for not having my bracelet on my last couple steps but i left it in my friend's moms car the other day any ways thanks for checking out this guide. Like,follow,and have a amazin day

keyboard shortcuts:     previous step     next step
Comments
0 COMMENTS
View More Comments