How to Make a Candle Holder From Pallet Wood

Check out my other guide for instructions on how to dissemble a pallet

2.7k Views 264 Likes
How to Make a Candle Holder From Pallet Wood
13 Steps
Supplies
Embed
1
From the pallet wood, I cut 2' strips of the 2x4

From the pallet wood, I cut 2' strips of the 2x4

2
The tea candle fits in a 1 3/4" Forstner bit

The tea candle fits in a 1 3/4" Forstner bit

Recommended For You
3
On your drill press, set the depth to the height of the tea candle

On your drill press, set the depth to the height of the tea candle

4
5
I marked the center of the board, then the location of where I wanted to drill the holes

I marked the center of the board, then the location of where I wanted to drill the holes

6
Center hole first

Center hole first

7
Test fit

Test fit

8
9
10
Item clamped it in my vise to rout the edges

Item clamped it in my vise to rout the edges

11
I used a 1/4 round over bit

I used a 1/4 round over bit

12
Did a little light sanding

Did a little light sanding

13
Then stained it

Then stained it

keyboard shortcuts:     previous step     next step
Comments
0 COMMENTS
View More Comments