How to Make a Balloon Mad Birds Parody

Here's a relatively simple way to make this famous little game character

3.3k Views 52 Likes 6 Comments
How to Make a Balloon Mad Birds Parody
22 Steps
Supplies
Embed
1
Here are the supplies.  I've tried to make this as simple as possible,  but it's not what I would call a beginners balloon :-)

Here are the supplies. I've tried to make this as simple as possible, but it's not what I would call a beginners balloon :-)

2
Inflate the 11" red balloon to approx 8" .  The balloon should just start to look balloon shaped , but still very squishy.

Inflate the 11" red balloon to approx 8" . The balloon should just start to look balloon shaped , but still very squishy.

Recommended For You
3
Inflate the two 5" white balloons to about 2.5" each and tie together

Inflate the two 5" white balloons to about 2.5" each and tie together

4
Like this (this is called a duplet and is one of the building blocks of balloon decor )

Like this (this is called a duplet and is one of the building blocks of balloon decor )

5
Inflate the yellow 260 to about 12-13" .

Inflate the yellow 260 to about 12-13" .

6
Twist off a 1.5" bubble

Twist off a 1.5" bubble

7
And fold it onto the rest of the balloon creating ado double bubble set.  Tie it off by wrapping the nozzle in and out of the seam

And fold it onto the rest of the balloon creating ado double bubble set. Tie it off by wrapping the nozzle in and out of the seam

8
Then collapse the bubbles onto themselves and twist around to make double pinch twists

Then collapse the bubbles onto themselves and twist around to make double pinch twists

9
Make a 4" bubble

Make a 4" bubble

10
And a 2" bubble and twist into the pinch twists at bottom

And a 2" bubble and twist into the pinch twists at bottom

11
Then cut the rest off

Then cut the rest off

12
Like this

Like this

13
Attach the pinch twists to the nozzle of the red balloon

Attach the pinch twists to the nozzle of the red balloon

14
Like this....

Like this....

15
And then twist the whir round balloons into it

And then twist the whir round balloons into it

16
Like so...

Like so...

17
Inflate the black 260 to about 8", then tie off and trim the rest

Inflate the black 260 to about 8", then tie off and trim the rest

18
Fold it in half to find the center point

Fold it in half to find the center point

19
And twist one side at the center to make a joint between them (hint keep hold of both sides until it is attached to the rest of the piece)

And twist one side at the center to make a joint between them (hint keep hold of both sides until it is attached to the rest of the piece)

20
Now twist it into the eyes/ beak

Now twist it into the eyes/ beak

21
Like so...

Like so...

22
And add artwork ...  A very mad bird! Copyright Balloon Utopia tm  2012.  Www.balloonutopia.com

And add artwork ... A very mad bird! Copyright Balloon Utopia tm 2012. Www.balloonutopia.com

keyboard shortcuts:     previous step     next step
Comments
6 COMMENTS
View More Comments