To make this project I used a Gelli Plate, various paints, a stamp, dye ink, and alcohol markers.
I also used wax paper, water on a spritzer, and a brush
First, I added silver acrylic paint with a brush to the 5" x 7" Gelli Plate.
I stamped this lovely Alice in Wonderland rabbit twice. I fuzzy cut one of them to use it as a mask.
I adhered the mask to the stamped cardstock with low tack tape. This mask is used, and that is why it's covered with paint.
I pressed the stamped cardstock face down to the Gelli Plate. If the mask is removed you are left with a clean image ready to color. But I kept adding layers of paint to the background.
Now I applied blue paint to the Gelli Plate.
I moved the paint with crumpled wax paper.
Once again, I spritzed water to the Gelli Plate.
I pressed down the stamped cardstock to the Gelli Plate, always masking the image. Again, the image remains intact, while I continued layering paint to the cardstock.
Now I added yellow paint to the Gelli Plate, but because my brush still had a bit of blue on it, it turned out green! I also moved the paint with a new piece of crumpled wax paper.
And this is the final result. Now the image is ready to be colored.
Here's another print I made before. Notice that each print will result different every single time, since the process is manual. That is part of the magic of the Gelli Plate.
I colored my image with Spectrum Noir alcohol markers.
I love how you can achieve a monoprint together with a stamped and colored image, all in one layer.
To add interest I die cut the print as a frame. Then I die cut the image with an oval die.
I wrapped the frame with red ribbon and then mounted the oval image, aligning it with the frame perfectly. I tied a bow, added a little vynil gem sticker and adhered it all to a card base.
For more about my work please visit gracielliedesign.blogspot.com/ For more about the supplies used visit sincitystamps.com/