How to Create Your Own Recycled Guitar

This is a step by step guide of how to make a recycled guitar

1k Views 96 Likes
How to Create Your Own Recycled Guitar
5 Steps
Supplies
Embed
1
First collect the materials which are: 2X wood, a round pice of wood, a paint tin, M6 nuts,bolts,washers ,wood screws and guitar strings.

First collect the materials which are: 2X wood, a round pice of wood, a paint tin, M6 nuts,bolts,washers ,wood screws and guitar strings.

2
Create two holes each side of the paint tin so that the guitar neck can slide through it, it would fit better if you measured the wood onto the paint tin and marked it.Cut out the holes with a knife

Create two holes each side of the paint tin so that the guitar neck can slide through it, it would fit better if you measured the wood onto the paint tin and marked it.Cut out the holes with a knife

Recommended For You
3
With the other pice of wood place it onto of the paint tin so it fits across and add four holes so it keeps it in place and and on top put the round pice of wood and screw that on.

With the other pice of wood place it onto of the paint tin so it fits across and add four holes so it keeps it in place and and on top put the round pice of wood and screw that on.

4
Then put 3 holes in the bottom of the wood so the strings can tie it onto the wood. Then at the other end drill out 3 holes for the bolts to fit through. Then attach strings through holes and bolts.

Then put 3 holes in the bottom of the wood so the strings can tie it onto the wood. Then at the other end drill out 3 holes for the bolts to fit through. Then attach strings through holes and bolts.

5
Then your done!

Then your done!

keyboard shortcuts:     previous step     next step
Comments
0 COMMENTS
View More Comments