How to Create a Wall Hanging With Swirlydoos May Kit

An OTP project made using the contents of the Main kit, Flower Add On & Embellishment Add on kits from the Swirlydoos May 'Peach Blossom' kit. swirlydoos.com

158 Views 9 Likes
How to Create a Wall Hanging With Swirlydoos May Kit
23 Steps
Supplies
Embed
1
This is the paper I chose to cover my wood Plaque - Lovable. I cut & used the bottom of the paper with the florals for the large plaque.

This is the paper I chose to cover my wood Plaque - Lovable. I cut & used the bottom of the paper with the florals for the large plaque.

2
Take the wood plaques and paint with a chalk finish paint.

Take the wood plaques and paint with a chalk finish paint.

Recommended For You
3
Completely cover on one side and just edges on the other side. It's going to be covered with paper, so save your paint!

Completely cover on one side and just edges on the other side. It's going to be covered with paper, so save your paint!

4
When dry I spray the backs of my plaques with a spray and shine sealer. This gives protection, keeps it clean and gives the back a nice finished look.

When dry I spray the backs of my plaques with a spray and shine sealer. This gives protection, keeps it clean and gives the back a nice finished look.

5
I used the remainder of the 'Lovable' paper to cut to size for the 3 small plaques.

I used the remainder of the 'Lovable' paper to cut to size for the 3 small plaques.

6
Round all the corners with a corner punch.

Round all the corners with a corner punch.

7
Distress all edges heavily.

Distress all edges heavily.

8
Ink all edges, first with the Prima Chalk ink & then the very edge with Distress Ink. Glue all papers to plaques.

Ink all edges, first with the Prima Chalk ink & then the very edge with Distress Ink. Glue all papers to plaques.

9
Use Emboss It Dabber through a stencil on left & right hand side of large plaque.

Use Emboss It Dabber through a stencil on left & right hand side of large plaque.

10
Cover with Wow embossing powder, heat with heat gun to set dropping in some Frantage antique gold embossing enamel whilst heating.

Cover with Wow embossing powder, heat with heat gun to set dropping in some Frantage antique gold embossing enamel whilst heating.

11
Cut some doilies out of paper 'Romance'. Distress & ink edges.

Cut some doilies out of paper 'Romance'. Distress & ink edges.

12
Layer up the doily with the rope circle & the big flower on the right side. Add smaller flowers & metal embellishment. I changed my mind with the left hand side after taking this photo!

Layer up the doily with the rope circle & the big flower on the right side. Add smaller flowers & metal embellishment. I changed my mind with the left hand side after taking this photo!

13
Glue chain along the bottom. Ink edges of alpha tiles & glue on. Use some glue/gel medium in places around cluster and drop the mica flake onto it.

Glue chain along the bottom. Ink edges of alpha tiles & glue on. Use some glue/gel medium in places around cluster and drop the mica flake onto it.

14
Small plaque 1. Layer up the chicken wire, big bow and leaves. Ink word tiles. Glue on.

Small plaque 1. Layer up the chicken wire, big bow and leaves. Ink word tiles. Glue on.

15
Add flowers. This is the die I used for the leaves. Use the reverse side of the 'Lovable' paper for these.

Add flowers. This is the die I used for the leaves. Use the reverse side of the 'Lovable' paper for these.

16
Add small pieces of the brown lace trim twisted into the flower cluster.

Add small pieces of the brown lace trim twisted into the flower cluster.

17
Plaque 2. Layer up a punched strip & lace and flowers.  Add a piece of chain to the jewel. Ink word tiles. Glue on.

Plaque 2. Layer up a punched strip & lace and flowers. Add a piece of chain to the jewel. Ink word tiles. Glue on.

18
Add some mica flakes to cluster with glue.

Add some mica flakes to cluster with glue.

19
Plaque 3. Layer up punched border strip with chicken wire, doily, die cut leaf & flowers. Ink word tiles. Glue on. Add twists of the brown lace trim to cluster. Add mica flakes with glue.

Plaque 3. Layer up punched border strip with chicken wire, doily, die cut leaf & flowers. Ink word tiles. Glue on. Add twists of the brown lace trim to cluster. Add mica flakes with glue.

20
On all 4 plaques add pearls.

On all 4 plaques add pearls.

21
22
Lastly using a ink blending tool just brush over the tops of the flowers with some Distress Ink Vintage Photo.

Lastly using a ink blending tool just brush over the tops of the flowers with some Distress Ink Vintage Photo.

23
The finished result! Hope you enjoyed looking at this Snapguide. Don't forget to please visit Swirlydoos at http://swirlydoos.com and my blog http://shabbypapers.blogspot.co.uk/

The finished result! Hope you enjoyed looking at this Snapguide. Don't forget to please visit Swirlydoos at swirlydoos.com and my blog shabbypapers.blogspot.co.uk/

keyboard shortcuts:     previous step     next step
Comments
0 COMMENTS
View More Comments