How to Create a Hexa Fishtale Bracelet

For all you DIY craft lovers looking for something a little more challenging to do. Difficulty-intermediate. {Note: you don't have to use the colors I've chosen}

125 Views 8 Likes
How to Create a Hexa Fishtale Bracelet
11 Steps
Supplies
Embed
1
Step 1: Choose your 7 colors of rubber bands.

Step 1: Choose your 7 colors of rubber bands.

2
Step 2: Count out 10 bands of each color.

Step 2: Count out 10 bands of each color.

Recommended For You
3
Step 3: Put 1 of 1st color of four fingers. (Excluding pinky)

Step 3: Put 1 of 1st color of four fingers. (Excluding pinky)

4
Step 4: Twist each corner on each finger. (Should get tight and look like ^this^)

Step 4: Twist each corner on each finger. (Should get tight and look like ^this^)

5
Step 5: Put 1 of same color band on fingers above the 1st band.

Step 5: Put 1 of same color band on fingers above the 1st band.

6
Step 6: From bottom pull bands over top from all corners.

Step 6: From bottom pull bands over top from all corners.

7
Step 7: Continue adding bands 1 at a time pulling corners up and over between each band.

Step 7: Continue adding bands 1 at a time pulling corners up and over between each band.

8
Step 8: Once at desired length, collect all 4 corners onto 1 finger.

Step 8: Once at desired length, collect all 4 corners onto 1 finger.

9
Step 9: Get "S" or "C" clip and put all 4 corners onto it.

Step 9: Get "S" or "C" clip and put all 4 corners onto it.

10
Step 10: Pull bracelet off fingers carefully.

Step 10: Pull bracelet off fingers carefully.

11
Step 11: Connect other end of bracelet with the same clip to complete your project! πŸ€—πŸ€—

Step 11: Connect other end of bracelet with the same clip to complete your project! πŸ€—πŸ€—

keyboard shortcuts:     previous step     next step
Comments
0 COMMENTS
View More Comments