How to Create a Custom Mousepad in 60 Seconds

Create custom mousepad in one minute with the GO UNO printer.

2k Views 21 Likes
How to Create a Custom Mousepad in 60 Seconds
7 Steps
Supplies
Embed
1
You will need printed transfer paper, a blank mousepad, heat transfer tape to position the transfer, and a heat press to begin.

You will need printed transfer paper, a blank mousepad, heat transfer tape to position the transfer, and a heat press to begin.

2
Print the GO UNO Weedless Transfer Paper from the GO UNO Printer. The GO UNO Printer prints approximately one sheet of transfer paper every two seconds.

Print the GO UNO Weedless Transfer Paper from the GO UNO Printer. The GO UNO Printer prints approximately one sheet of transfer paper every two seconds.

Recommended For You
3
Choose a blank mousepad to transfer to. Mousepads are very inexpensive and come in a variety of shapes to help you customize!

Choose a blank mousepad to transfer to. Mousepads are very inexpensive and come in a variety of shapes to help you customize!

4
You may begin with the mousepad on top  of the image and tape the mousepad to the transfer paper to ensure the image is properly aligned.

You may begin with the mousepad on top of the image and tape the mousepad to the transfer paper to ensure the image is properly aligned.

5
If you followed the previous step, flip the mousepad over so that the back of the transfer paper now faces you.. A protective sheet beneath the mousepad will help keep your heat press clean.

If you followed the previous step, flip the mousepad over so that the back of the transfer paper now faces you.. A protective sheet beneath the mousepad will help keep your heat press clean.

6
Heat the paper at 330-345 F (depending on your heat press) for 30 seconds. You may peel  the paper after the 30 seconds are up.

Heat the paper at 330-345 F (depending on your heat press) for 30 seconds. You may peel the paper after the 30 seconds are up.

7
You now have a custom mousepad in one minute!

You now have a custom mousepad in one minute!

keyboard shortcuts:     previous step     next step
Comments
0 COMMENTS
View More Comments