How to Create a Bracelet Using Graphic 45 Products

You'll learn how to create a beautiful bracelet using Graphic 45's Communique Deluxe Collectors Edition and a variety of Staples.

4.8k Views 7 Likes 2 Comments
How to Create a Bracelet Using Graphic 45 Products
23 Steps
Supplies
Embed
1
You'll need to take out six jump rings, six eye pins and ten clear bauble beads.

You'll need to take out six jump rings, six eye pins and ten clear bauble beads.

2
To assemble the bead sets, slide two beads down the eyepin. Make sure the closed part of the pin is facing down. Wrap the top of the eyepin around the jump ring. Repeat until you have all 6 done.

To assemble the bead sets, slide two beads down the eyepin. Make sure the closed part of the pin is facing down. Wrap the top of the eyepin around the jump ring. Repeat until you have all 6 done.

Recommended For You
3
Pick a chipboard tag. Trace the tag around a piece of patterned paper. Trim out paper tag. Ink edges of all pieces using Black Soot Distress Ink & Blending Tool.

Pick a chipboard tag. Trace the tag around a piece of patterned paper. Trim out paper tag. Ink edges of all pieces using Black Soot Distress Ink & Blending Tool.

4
Pick a chipboard tag. Trace the tag around a piece of patterned paper. Trim out paper tag. Fussy cut a pen, filmstrip & camera. Ink edges of all pieces using Black Soot Distress Ink & Blending Tool.

Pick a chipboard tag. Trace the tag around a piece of patterned paper. Trim out paper tag. Fussy cut a pen, filmstrip & camera. Ink edges of all pieces using Black Soot Distress Ink & Blending Tool.

5
Pick one keyhole. Pick one brad and cut the back off of it. Fussy cut two postage stamps and a pen. Ink the edges of the pen and stamps using Black Soot Distress Ink and a blending tool.

Pick one keyhole. Pick one brad and cut the back off of it. Fussy cut two postage stamps and a pen. Ink the edges of the pen and stamps using Black Soot Distress Ink and a blending tool.

6
Pick one keyhole. Pick one brad and cut the back off of it. Fussy cut two postage stamps and a pen. Ink the edges of the pen and stamps using Black Soot Distress Ink and a blending tool.

Pick one keyhole. Pick one brad and cut the back off of it. Fussy cut two postage stamps and a pen. Ink the edges of the pen and stamps using Black Soot Distress Ink and a blending tool.

7
Pick out two keys from the key package. Fussy cut four public telephone buttons. Ink the edges of all four buttons using Black Soot Distress Ink and a blending tool.

Pick out two keys from the key package. Fussy cut four public telephone buttons. Ink the edges of all four buttons using Black Soot Distress Ink and a blending tool.

8
Take one door pull out. Take one brad out & cut the back off of it. Fussy cut 1 pen, 1 postage stamp & a mutal image. Ink the edges of the paper pieces using Black Soot Distress Ink & a blending tool.

Take one door pull out. Take one brad out & cut the back off of it. Fussy cut 1 pen, 1 postage stamp & a mutal image. Ink the edges of the paper pieces using Black Soot Distress Ink & a blending tool.

9
Take one key hole and adhere the brad to the bottom hole. Adhere the postage stamps overtop of the keyhole on an angle. Adhere the pen in the middle of the stamps. Roll one corner down on each stamp.

Take one key hole and adhere the brad to the bottom hole. Adhere the postage stamps overtop of the keyhole on an angle. Adhere the pen in the middle of the stamps. Roll one corner down on each stamp.

10
Take one key hole and adhere the brad to the bottom hole. Adhere the postage stamps overtop of the keyhole on an angle. Adhere the pen in the middle of the stamps. Roll one corner down on each stamp.

Take one key hole and adhere the brad to the bottom hole. Adhere the postage stamps overtop of the keyhole on an angle. Adhere the pen in the middle of the stamps. Roll one corner down on each stamp.

11
Take one key  and adhere the public telephone button to the middle of the key. Adhere a second public telephone button to the back middle of the key.

Take one key and adhere the public telephone button to the middle of the key. Adhere a second public telephone button to the back middle of the key.

12
Take one key  and adhere the public telephone button to the middle of the key. Adhere a second public telephone button to the back middle of the key.

Take one key and adhere the public telephone button to the middle of the key. Adhere a second public telephone button to the back middle of the key.

13
On one of the chipboard tags, adhere the paper tag to the back of the chipboard tag. Adhere the pen, filmstrip and camera to the front of the chipboard tags as desired.

On one of the chipboard tags, adhere the paper tag to the back of the chipboard tag. Adhere the pen, filmstrip and camera to the front of the chipboard tags as desired.

14
On the second chipboard tag, adhere the paper tag to the back of the chipboard tag.

On the second chipboard tag, adhere the paper tag to the back of the chipboard tag.

15
Take the door pull and adhere the brad to the bottom hole. Adhere the postage stamps, mutal image and a pen on the inside of the door pull.

Take the door pull and adhere the brad to the bottom hole. Adhere the postage stamps, mutal image and a pen on the inside of the door pull.

16
Use an eyepin & wrap around to create a circle at the top hole of pull (trim a bit off the pin). Slide a jump ring through the newly made wire ring. Close wire. Open jump ring & attach to bracelet.

Use an eyepin & wrap around to create a circle at the top hole of pull (trim a bit off the pin). Slide a jump ring through the newly made wire ring. Close wire. Open jump ring & attach to bracelet.

17
Attach a jump ring through the top of the bead set. Open jump ring and attach to the bracelet, two links away from pull. Close jump ring once on bracelet. Repeat the previous steps for other bead set.

Attach a jump ring through the top of the bead set. Open jump ring and attach to the bracelet, two links away from pull. Close jump ring once on bracelet. Repeat the previous steps for other bead set.

18
Attach a jump ring through the top of the key. Open jump ring and attach to the bracelet, two links away from beads. Close jump ring once on bracelet. Repeat the previous steps for other key.

Attach a jump ring through the top of the key. Open jump ring and attach to the bracelet, two links away from beads. Close jump ring once on bracelet. Repeat the previous steps for other key.

19
Attach a jump ring through the top of the bead set. Open jump ring and attach to the bracelet, two links away from key. Close jump ring once on bracelet. Repeat the previous steps for other bead set.

Attach a jump ring through the top of the bead set. Open jump ring and attach to the bracelet, two links away from key. Close jump ring once on bracelet. Repeat the previous steps for other bead set.

20
Use an eyepin & wrap around to create a circle at the top hole of keyhole (trim a bit off the pin). Slide a jump ring through the newly made wire ring. Close wire. Open jump ring & attach to bracelet.

Use an eyepin & wrap around to create a circle at the top hole of keyhole (trim a bit off the pin). Slide a jump ring through the newly made wire ring. Close wire. Open jump ring & attach to bracelet.

21
Attach a jump ring through the top of the bead set. Open jump ring and attach to the bracelet, two links away from keyhole. Close jump ring once on bracelet. Repeat previous steps for other bead set.

Attach a jump ring through the top of the bead set. Open jump ring and attach to the bracelet, two links away from keyhole. Close jump ring once on bracelet. Repeat previous steps for other bead set.

22
Use an eyepin & wrap around to create a circle at the top hole of tag (trim a bit off the pin). Slide a jump ring through the newly made wire ring. Close wire. Open jump ring & attach to bracelet.

Use an eyepin & wrap around to create a circle at the top hole of tag (trim a bit off the pin). Slide a jump ring through the newly made wire ring. Close wire. Open jump ring & attach to bracelet.

23
Your bracelet is now finished!

Your bracelet is now finished!

keyboard shortcuts:     previous step     next step
Comments
2 COMMENTS
View More Comments