- 1
-
Choose your Designer Paper and Wood Embellishment. Trace out the wood embellishment.
- 2
-
Use Scissors to cut out your Designer Paper.
Recommended For You
- 3
-
Choose the paper that will compliment the wood piece.
- 4
-
I use Liquitex Varnish to paste the paper to the wood piece. Don't varnish the designer paper. Varnish the back of the side of the wood piece.
- 5
-
Once the varnish has dried, use the X-Acto knife to trim any over lap of designer paper from the wood piece.
- 6
-
Carefully sand any rough edges. Lightly sand in a downward motion.
- 7
-
You are almost finish.
- 8
-
Use ink to blend the edges.
- 9
-
Cover entire wood embellishment with Glossy Accent.
- 10
-
Let dry overnight and you will have a wonderful covered wood embellishment. Thank you for watching.