Remove screw with Phillips screwdriver on iPhone 4 GoPro case holder assembly
Disassemble iPhone 4 go pro case holder (rear adapter, front plug, caseclamp)
Retain front plug and back go pro adapter
Note: As you can see, front plug is smooth
Disassemble iPhone 5 belt clip caseholder, inside retainer twists off. U do not need the round plug/retainer or rear belt clip adapter any more. You will be using the caseclamp
Note: the iPhone 5 caseclamp from the beltclip unit has a hole with 4 small tabs molded in
Use knife or ex to to trim out the small tabs. Be careful and obviously do not cut yourself. A dremel tool or hot knife would also do the job.
Now the front round plug from the iPhone 4 GoPro adapter assembly drops in
The go pro iPhone 4 GoPro rear adapter fits the iPhone 5 caseclamp just like it did the iPhone 4 caseclamp
The two prices final fit to the iPhone 5 caseclamp
Reinstall the screw and nut to unit the iPhone 4 GoPro err adapter and front plug to the IPhone 5 belt clip caseclamp.
Assembled pieces mounted to ram mount system, or tripod or any go pro adhesive mount
You now have an iPhone 5 GoPro adapter to hold your iPhone in/on any GoPro or tripod system
The back side.