How to Make a Rainbow Loom Starburst Bracelet

Enjoy! :D

183.3k Views 1265 Likes 287 Comments
1

Take your Rainbow Loom and make sure the arrow is facing away from you.

2
Image for Step 2

Pick one color and go from the left side all the way up to the top.

Recommended For You
3
Image for Step 3

Like so.....

4
Image for Step 4

Finish the first row like this.. Then do the other row from the bottom back to the top.

5
Image for Step 5

It should look like this! Push the rubber bands down so you have room on top of them.

6
Image for Step 6

Go back to the bottom and take your first starburst color and place it like so.

7
Image for Step 7

Place them clockwise, an push them down in the center as you go so it is not bunched up on he middle peg.

8
Image for Step 8

First finished starburst!

9
Image for Step 9

Put the next rubber band color like so. And follow the pattern like the first.

10
Image for Step 10

Your second finished starburst! Continue the process until you have reached the top of the loom.

11
Image for Step 11

Now you are ready to put the cap bands on.

12
Image for Step 12

Twist the first cap band into a figure 8.

13
Image for Step 13

Put one of the loops on top of the other loop to create a double O.

14
Image for Step 14

Put the cap band on the first starburst. Do the same process for the middle of all the starbursts until you get to the top.

15
Image for Step 15

Once you have finished all the cap bands on the center of the starbursts....

16
Image for Step 16

Add one more cap band on the last peg of the middle row of pegs.

17

Flip the loom around. So the arrow is now facing you.

18
Image for Step 18

Now grab your hook!

19
Image for Step 19

Take the (purple) rubber band from the first peg as pull it over the cap band on to the middle peg.

20
Image for Step 20

This is what it should look like...

21
Image for Step 21

Then pull the next rubber band over the middle peg to the next peg counterclockwise. (it should be the same rubber band that was on the peg earlier). It just looks like a loop over the peg.

22
Image for Step 22

This is what it looks like.

23
Image for Step 23

Do the same process again by grabbing the rubber band an pulling it over, COUNTERCLOCKWISE!!!

24
Image for Step 24

Do the same thing for the whole starburst. No bands should be left on the middle peg.

25
Image for Step 25

Pull the next rubber band over the middle peg of the next starburst. Hook all the starbursts counterclockwise until you get to the top.

26
Image for Step 26

Almost done!!

27
Image for Step 27

Take the top (white) band a pull it through the peg and around like so.

28
Image for Step 28

Do the same thing on the other side so it looks like this.

29
Image for Step 29

Take the bottom rubber band and pull it through the top and hook it on the next peg forward. Keep on going until you reach the top. (This is just showing you the bottom band).

30
Image for Step 30

Like so. Go through the peg and grab the bottom band (the band I showed you in the pervious step).

31
Image for Step 31

Go diagonal to the last peg. Go back to the bottom of the loom ad loop back up to the top, go diagonal again.

32
Image for Step 32

This is what it should look like, comment if you need help!

33
Image for Step 33

Put the hook through the peg at the top of the loom catch all the bands!

34
Image for Step 34

Put a rubber band on the hook, pull it through so the one rubber band is holding the bracelet on the loom. Then loop it over the hook so there is two O's on the hook.

35
Image for Step 35

Like so...

36
Image for Step 36

Pull the bracelet off the loom.

37
Image for Step 37

Grab your c clip.

38
Image for Step 38

Add a c clip to the bracelet side that is attached to the hook.

39
Image for Step 39

Another view of what it should look like.

40

Take the bracelet of the hook carefully!!!

41
Image for Step 41

Put the end (without the clip) on your finger(s).

42
Image for Step 42

Take another rubber band and fold it under the "black" band.

43
Image for Step 43

Grab the loose ends of the "white" band. It will create this...

44
Image for Step 44

Do that with a total of 5-6 rubber bands.

45
Image for Step 45

Take one end of the bracelet and clip it to the other end.

46
Image for Step 46

This is what it should look like.

47
Image for Step 47

Ta da!! Comment if you need help!!

48
Image for Step 48

Enjoy! :D

49

If you have a question please DM me on my profile, then message me privately, THANKS!πŸ’•

50

Please make sure to request more guides, I need ideas! Also please check out my other guides, and ❀️ it up! Thanks MakenaπŸ’•

keyboard shortcuts:     previous step     next step
Comments
287 COMMENTS
View More Comments