Sign In with Facebook or Twitter
Or use your email address
How to Make a Fence for Your Garden
So first get your idea of how u want it to look. I copied this idea.
So I use pallets to get an idea of how big I wanted it to look.
I started putting pocket holes in each rails. I put all three holes on each end.
Next I put up post to each corner points.
Then I started adding the rails.
Here's the other end.
Then I got more screws and finally got it all up. In the center I put up two more post so I can set up for a door.
Then I put up the 2x4 on the top.
Here's a finish product of top with the decoration on each post.
Then I added the door. This is actually the second style I did because the first one sucked. Lol
I added a 3 inch stud underneath so water runs thru and doesn't soaked the 2x4.
Here's a shot of how it's going to look. This season I'm trying the smart pots and dirt pots.
Thanks for looking and hope I gave u guys ideas. I did this mainly because I have dogs and my male bully likes to go chew everything. Thanks again.
Check out other guides by this author!
Keep Exploring
Start Over
200 Pocket screws 200 - 11/2 coarse thread
150 21/2 coarse thread pocket screws
1 Kreg master jig or similar
7 2x4
60 18 inch .75 x 2.5 inch wood.
1 Drill
Rene Y. 12 months ago
Edward N Rachelle Deguzman (author) last year
Debbi B last year
Be first to comment on Step 1.
Be first to comment on Step 2.
Be first to comment on Step 3.
Be first to comment on Step 4.
Be first to comment on Step 5.
Be first to comment on Step 6.
Be first to comment on Step 7.
Be first to comment on Step 8.
Be first to comment on Step 9.
Be first to comment on Step 10.
Be first to comment on Step 11.
Be first to comment on Step 12.
Be first to comment on Step 13.