How to Make a Fabulous Box Out of a Nesquik Container (:

Start the Guide
Make a fabulous box out of a nesquik container (:

How to Make a Fabulous Box Out of a Nesquik Container (:

1.2k Views
Step 1 of 29

This guide will tell you how to turn an everyday item into a homemade masterpiece! (:

Step 2 of 29
Gather all your supplies (: the list below will tell you what you need .

Gather all your supplies (: the list below will tell you what you need .

Step 3 of 29
Take the piece of paper and measure it 6 inches down. (my ruler says ten inches because it's broken -__-)  Draw a line to mark the measurement.

Take the piece of paper and measure it 6 inches down. (my ruler says ten inches because it's broken -__-) Draw a line to mark the measurement.

Step 4 of 29
Now you can line up your paper on the cutter and cut the excess.

Now you can line up your paper on the cutter and cut the excess.

Step 5 of 29
You paper should now look like this! Make sure you hold on to both pieces.

You paper should now look like this! Make sure you hold on to both pieces.

Step 6 of 29
Take the part you just cut and measure it 6 more inches from the side.

Take the part you just cut and measure it 6 more inches from the side.

Step 7 of 29
Mark your measurement. (:

Mark your measurement. (:

Step 8 of 29
Now cut cut cut away!

Now cut cut cut away!

Step 9 of 29
These are the two pieces you will absolutely need. (:

These are the two pieces you will absolutely need. (:

Step 10 of 29

I used purple paper just as a demonstration so you could see the measurement easier. Im actually decorating mine in black (:

Step 11 of 29
Wrap the largest piece of paper around the box. Their should be a gap in the back.

Wrap the largest piece of paper around the box. Their should be a gap in the back.

Step 12 of 29
Here is the back (:

Here is the back (:

Step 13 of 29

If you do not have brackets, you can skip this step and jump to step number 16.

Step 14 of 29
Now you need to make a hole for your brackets. I chose to use a non cranking hole puncher to make the hole.  You can purchase these at any craft store. (:

Now you need to make a hole for your brackets. I chose to use a non cranking hole puncher to make the hole. You can purchase these at any craft store. (:

Step 15 of 29
Here is the hole. You may need to keep poking it to make it big enough.

Here is the hole. You may need to keep poking it to make it big enough.

Step 16 of 29
Now insert the bracket , I chose to use a silver one so you can't really see it that well.

Now insert the bracket , I chose to use a silver one so you can't really see it that well.

Step 17 of 29
Now pull back the sides (:

Now pull back the sides (:

Step 18 of 29
Put brackets in all four corners (:

Put brackets in all four corners (:

Step 19 of 29
After the brackets, or if you don't have any, you can just simply tape the back!

After the brackets, or if you don't have any, you can just simply tape the back!

Step 20 of 29

Use stickers, paint, ribbon, glitter or anything else you want to decorate your box. Be sure to make it cute!! 🎀

Step 21 of 29
Here is my finished product!!

Here is my finished product!!

Step 22 of 29
Now fill your box with anything. I put bracelets in mine (:

Now fill your box with anything. I put bracelets in mine (:

Step 23 of 29
Now this lid looks very boring, let's spice it up a little!

Now this lid looks very boring, let's spice it up a little!

Step 24 of 29
Put colorful brackets in your lid. You can use anything to decorate it actually (:

Put colorful brackets in your lid. You can use anything to decorate it actually (:

Step 25 of 29
Now doesn't that look better!

Now doesn't that look better!

Step 26 of 29
You can add another piece of paper to the bottom as a base (: just simply glue it down .

You can add another piece of paper to the bottom as a base (: just simply glue it down .

Step 27 of 29
The only thing bad about this project is the mess afterward ... Oh well, it's worth it!

The only thing bad about this project is the mess afterward ... Oh well, it's worth it!

Step 28 of 29
Here's the finished product! So simple yet so cute!

Here's the finished product! So simple yet so cute!

Step 29 of 29

Who knew a nesquik container could be so fab?! But thanks for looking at my guide. Please like, comment and follow me! (:

Start Over

5 Comments
Supplies

Decorations

Small brackets and/or tape

Paper

Paper Cutter

Ruler

Puncher for brackets

Tape

Nancy Triggs

This is simply beautiful! I think You are artistically talented.

Nancy Triggs 11 months ago

Alicia P

Thanks for t guide!

Alicia P 11 months ago

Y P

Nicely done! Now I know what can be done to reuse all those containers!! 

Y P 11 months ago

Hannah Lewis

Thanks!!

(author) 11 months ago

Julie Sandefur

Great idea! I'm gonna make one!

Julie Sandefur 11 months ago

Be first to comment on Step 1.

Be first to comment on Step 2.

Be first to comment on Step 3.

Be first to comment on Step 4.

Be first to comment on Step 5.

Be first to comment on Step 6.

Be first to comment on Step 7.

Be first to comment on Step 8.

Be first to comment on Step 9.

Be first to comment on Step 10.

Be first to comment on Step 11.

Be first to comment on Step 12.

Be first to comment on Step 13.

Be first to comment on Step 14.

Be first to comment on Step 15.

Be first to comment on Step 16.

Be first to comment on Step 17.

Be first to comment on Step 18.

Alicia P

So this ends up being cobered as well, right? So, can't I make the black cover longer and cover it in one piece?

Alicia P 11 months ago

Be first to comment on Step 20.

Be first to comment on Step 21.

Be first to comment on Step 22.

Be first to comment on Step 23.

Be first to comment on Step 24.

Be first to comment on Step 25.

Be first to comment on Step 26.

Be first to comment on Step 27.

Be first to comment on Step 28.

Be first to comment on Step 29.