Open the bottom door of the fryer. This is what you should see.
Loosen both of the screws above the burners using a 5/16 wrench or nut driver
Remove the top plate that was secured by the screws
Open the drain valve with the blue handle
Place a screwdriver into the drain to prevent any material from falling inside
Use a 9/16 inch wrench to remove the orifice
Repeat for the remaining two orifices. This is how the unit should look.
Use a 1/2 inch wrench to loosen the nut under the pilot assembly
Use a Phillips screwdriver to remove the two screws that secure the pilot assembly to the bracket
Carefully moved the pilot assembly off to the side
This is the pilot burner orifice. Carefully remove this without using any tools
The pilot orifice simply sits right on the opening of the aluminum tube
Remove the red screw on the gas valve
This is what you should be looking at now
Using a flat tipped screwdriver loosen the interior plastic retaining screw
Carefully remove the spring under the plastic retaining screw
The LP parts are on the left. The natural gas parts are on the right
Replace the spring and plastic retaining screw
Replace the orifices and burner assemblies.
This is the data plate on the inside of the door.
Please use the sticker provided in the kit to notate the conversion
Here are the parts that are included in the conversion kit