How to Build a Stand for Your Topsy Turvys

1.5k Views 18 Likes 2 Comments
1
First get your supply. I had my 2x4 precut so it would be faster.

First get your supply. I had my 2x4 precut so it would be faster.

2
Then put pocket holes on both sides of the 4x4.

Then put pocket holes on both sides of the 4x4.

Recommended For You
3
Once you've connected all the 4x4, use the 2x4 to post as a brace. And cut your Angles and then use your kreg jig and then put screw them on.

Once you've connected all the 4x4, use the 2x4 to post as a brace. And cut your Angles and then use your kreg jig and then put screw them on.

4
Then the 2x4 that was cut at 1 feet each, connect them to each side of the 4x4 as the base so your stand will stand on its own.

Then the 2x4 that was cut at 1 feet each, connect them to each side of the 4x4 as the base so your stand will stand on its own.

5
Here's a picture of how it looks with the topsy turvy's now it's time to fill them up. Enjoy!

Here's a picture of how it looks with the topsy turvy's now it's time to fill them up. Enjoy!

keyboard shortcuts:     previous step     next step
Comments
2 COMMENTS
View More Comments