Remove the lashes by bending the plastic packaging carefully so you do not damage the lashes.. Like so...
Remove the packaging glue by carefully pulling it off the lash lining
Bend the lashes like shown to make them more flexible and less stiff
If you need to trim your lashes.. Place lash with no glue on your lid to measure how much you need to trim. Trim from the short end in. NOT the long!!!
Apply the glue. With a little more on each of the ends...
I use dark tone adhesive...when wet its light grey then dries black. Makes for a cleaner finish.
Use the hair dryer at the lowest level and speed dry the adhesive (not too much the glue should be dark grey.. Not black!) As shown.
Next. Applying the lash....
Center the lash with your eye. Apply the center then gradually apply the edges as shown. Use the pin comb to secure the lash
Finish off with using the hair dryer to harden the adhesive so it will set properly!
Make sure the lash ends are secured well! If need be.. Apply a little more glue using the tip of your pin comb (or toothpick). use the hair dryer to speed the drying while pressing the end of the lash
After the adhesive is set. Use an eyelash curler for a extra curl.
I wouldn't recommend applying mascara with false lashes. You may damage your natural lashes when taking the falsies off. If you want fuller looking lashes... Get bigger false lashes lol
Ready to party!!!!!! :)) good luck everybody! Remember to practice!!!!